Hunter Src Wiring Diagram (2024)

FAQs

What is Hunter SRC Plus? ›

Hunter Industries is pleased to present the SRC Plus – a Simple and Reliable Controller for residential applications. Designed with the needs of the customer in mind, the SRC Plus offers simplified dial programming and an impressive range of features typically found in controllers costing twice as much.

SRC Plus Reset

Press and release the RESET button in the lower wiring compartment.

If the sprinklers do not turn on you may have a valve shut down that supplies the irrigation system. If the sprinklers come on, you may have a wiring problem at the valves. Check the wiring connections at the valves for loose or corroded connections.

The programming process is straightforward and simple. The red and blue wires from the decoder are inserted into the programming port on the Decoder Output Module. The controller dial is turned to the Advanced Features, and using the display menus the contents of the decoder are displayed on the screen.

All stations are set to zero run time. This controller has a non-volatile memory that retains all entered program data even during power outages, without the need for a battery. Clean only with cloth dampened with mild soapy water. All necessary hardware is included for most installations.

A common reason for a controller to repeat a cycle is too many programmed start times. Only one start time per active program is required, a second start time will cycle the program an additional time. NOTE: In the Start Times dial position, the numbers 1-4 do not represent stations.

If your sprinkler system is not getting water, a number of things could be the culprit: The backflow may be off. If the handle on your backflow valve gets inadvertently shut off, it restricts any water from flowing past the backflow and to the sprinkler system valves. Your rain sensor might be faulty.

Place the multimeter in resistance and connect one lead to the zone wire (disconnected from the clock) and the other lead to the common wire for that zone (also disconnected). If the multimeter shows a reading of between 20 and 60 Ohms, the wire and the solenoid at the far end are probably good.

Q: Does A Sprinkler System Operate On AC Or DC Voltage? A: It's a common mistake to assume sprinkler valves work with DC voltage. While most valves indeed can be powered by DC voltage, they are designed to work with AC voltage in the range of 22 to 28 volts.

Inspect the sensor for debris or damage. The sensor may need to be cleaned, restarted, repaired, or replaced. If your controller seems to be working, or at least turning on, but the sprinklers themselves are acting erratically, there may be damage to a sprinkler line, head, or another part of the sprinkler system.

Is there a fuse in a Hunter irrigation controller? ›

Check the fuse: The Hunter XC controller has a fuse that may need to be replaced if it's blown.

Hunter Fraud Score is a rating score in India prepared by the credit information company Experian to help detect fraud in credit applications through analytical approach. The score was launched in 2016 and is used by Indian banks and insurance companies to help them lower their losses.

Hunter courses typically consist of eight to 10 jumps that are more organic in form and generally lower in height than fences used in jumper classes.

Tracking in hunting and ecology is the science and art of observing animal tracks and other signs, with the goal of gaining understanding of the landscape and the animal being tracked (the "quarry").

The Ultra provides matched precipitation rates and the regular PGP does not, which means extra work trying to make matched precipitation when choosing which nozzle to insert (for example, a half circle pattern giving 2 gpm has to be matched to a quarter circle pattern that would put out 1 gpm, full circle putting out 4 ...